Sunding Wireless Cycle Computer
Ride your bike with the Wireless Sunding cycle computer, tested by our own staff and our beloved customers, this cycle computer is guranteed working. At an affordable price, it is the perfect tool for beginners who are new to cycling as well as young riders who are keen to cycle.
Includes bracket, Lithium battery (for meter), magnet, meter, sensor (with13A 12V battery), cable ties and manual in English (download softcopy below)
Use a 10 cent coin to open the cap
Why is the screen blank even after I have inserted the battery?
Please make sure the battery is properly seated. Please make sure all the pins (picture below) are pressed down by the weight of the battery, you can tell the battery is seated properly by pressing it down on the pins and checking the screen, it should be ablle to flash once the battery is connected properly.
Push the Lithum battery until it sits snugly inside the casing (It's not the easiest thing to do)
If the battery still cannot sit properly, it's because the metal pin/s are bent. Use a screwdriver to press the pin back into place.
In the sensor there is a 23A 12V battery
Before you fix the sensor to your left fork, do this experiment by waving the magnet over the sensor (on the flat side of the sensor there is a marking of a small circle and word sensor). The meter reading should change when the magnet passed over the sensor, otherwise there is a problem with your meter. Contact us at email@example.com if problem persist.
Configure the meter according to the wheel size of your bicycle. Follow the instructions in the manual enclosed or download a soft copy from here.
To get back to the intial wheel setting or to start all over the configuration again, press the two buttons at the same time for few seconds
Last Updated: law 2018-08-20